Weekend Freedom Machines banner

JD 322 electric wire connection problem

251 Views 1 Reply 2 Participants Last post by  tmac58star
The pink wire from the electrical connector under my JD 322 has come off. Pictures below. I tried splicing in a piece of wire but it doesn't work. If I push the existing wire in it does work but it's not long enough to get a good grip. What are your suggestions?

See less See more
1 - 1 of 2 Posts
Unplug the connector, remove wires from plug, clean plug with CNC electric cleaner, clean pink wire end, order/receive a pack of new terminals, install terminal on pink wire (and others if they're worn), put wires back in connector...Bob's yer uncle! Others can help you get the right terminals. Don't know what they are offhand...
  • Like
Reactions: 2
1 - 1 of 2 Posts