Weekend Freedom Machines banner

JD 400 Steering Wheel Removal?

2167 Views 4 Replies 3 Participants Last post by  wader1914
Open to suggestions in removing my steering wheel. I've soaked w/PB Blaster ... have it hanging from an overhead hoist ... ruined threads on the steering gear (had left the nut on to "tap" on) and now just hoping to save the wheel ... ideas? Thanks, Bryan.
1 - 1 of 5 Posts
Bryan the easiest way to get these steering wheels off without damaging anything is using a bearing puller. You Put the bearing puller loose on the steering shaft and using the 2 threaded holes in thread this puller on top of the steering wheel like the pics I have below

This is a Bearing Puller

Installed on the tractor

See less See more
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.