Weekend Freedom Machines banner

jd 56 carburator linkage

2092 Views 1 Reply 2 Participants Last post by  david_louw
Can anybody help me with a picture of the correct way for the linkage wires and springs are to be mounted on a jd 56. A friend dropped one off at my house last nigh with the carb in a box and asked if I could help to get it running. The carb. was so gunked up the choke blade and trottle blades would not even move. Any help would be great. Thanks
1 - 2 of 2 Posts
Eric, Sorry I can't help with a picture but I could email you a manual for the engine,showing the links and more. Its ~2500KB in size. Can't remember where I offloaded it from, thought it was www.cpdonline.com but cannot find it there at the moment.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top