Weekend Freedom Machines banner
1 - 2 of 2 Posts

· Registered
8 Posts
Discussion Starter · #1 ·
I have a nice 1970 JD70 garden tractor . And I need help with the peerless1206 transaxle. I have it apart and find that the axles where the needle bearing rode are pretty badly worn. The shaft itself is obsolete and I am wondering if the group thinks it is worthwhile to have them welded and milled. I don,t plan on keeping it and am cautiously working on rebuilding the transaxle so I am going to need new bearings and seals. Any advice would be readily accepted. Thanks John
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.