Weekend Freedom Machines banner

JD140 H-1. Upgrade to H-3 questions

632 Views 2 Replies 2 Participants Last post by  oleboy
I tried a search in the archives, tho nothing come up. I'm sure that I'm not the first to ask about this conversion.

I have a 1969, JD140 H-1 that I want to upgrade to H-3. However, I do not have a manual for this tractor. I DO have a manual for my 1971, JD140 H-3 that I've been looking in about the hydraulics so I can get an idea of what will be needed.

My H-1 is currently stripped down to the bare frame as I prepare for a full restoration. I'd like to get it converted to an H-3 in the process, before anything gets painted.

I have a 3-spool valve, so now I need the levers, and left front hydraulic lines to close the loop and make everything operational. I'm not sure if I need any other hydraulic lines. Here's the valve. http://1drv.ms/1xuHinp

I'm hopeful someone who has done what I am wanting too, will chime in and share their wisdom.

1 - 1 of 3 Posts

That is the correct valve for a 140 sn below 50,000. I cannot help you too much on the rest of it.

1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.