Weekend Freedom Machines banner
1 - 2 of 2 Posts

·
Registered
Joined
·
73 Posts
Discussion Starter · #1 ·
I need some expert advice on replacing valves. My k181 has a stuck exhaust valve and the intake valve is seriously corroded. JD wants $70 for the exhaust valve that is most likely made from Stellite. I found some aftermarket valves for $30 each. Is their any significant advantage to buying the Stellite over the plain steel valves?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top