Weekend Freedom Machines banner

Kohler 341

1006 Views 12 Replies 6 Participants Last post by  gonetofarm
Pulled the Kohler for my 316 as it was running rough. Honed, ringed, valve grind and new bearing in the balancing gears. Timed per shop manual, now it runs rougher than ever,hops like crazy (new mounts), backfires like a truck when shut down. I suspect the balancing gears.
1 - 2 of 13 Posts
ramifications to removing them? None! Two less rotating items in the motor to cause problems.
out of three k341's I have built only one had a set of balance gears in it.
1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.