Weekend Freedom Machines banner

Model 60 rear axle leak

6K views 6 replies 5 participants last post by  david_a_calkins 
#1 ·
Has anyone on the forum changed a rear axle seal on a model 60? if so can they please share thier experance's in doing so. Thank You
 
#2 ·
Paul, on a model 60 the axle seal is a outboard seal behind the hub that runs in grease unlike the 100 and 200 series garden tractors and is a pretty simple change. I used a small pick tool to remove it and put it back together with a small piece of pipe as a seal set that would fit over the axle.remove the snap ring on the outer side of the rear wheel and slide it off, If it is not frozen onto the axle.
Good luck, Joe
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top