Weekend Freedom Machines banner
1 - 5 of 5 Posts

· Registered
6,867 Posts
The template is not 1:1 Scale if I recall correctly.

Post of mine here:


I centered the dimple in the HDAC mount (Feb 22 post) on the bump in the hood support for the exhaust pipe for the vertical location. This lines the hose up with the carburetor correctly. Moved toward the engine as far as I could with still leaving room for some clearance between the bumps so they wouldnt rub.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.