Weekend Freedom Machines banner
1 - 7 of 7 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
I have a Powerflo that I want to put on my 50" deck. Are Powerflo units made for specific decks? The one I have lines up perfectly except the rear mounting pin. On my previous 318 that had a Powerflo the rear mounting pin fit into a bracket inside the mower chute. This one lines up about 2" outside the chute. Need help.
 

·
Registered
Joined
·
20 Posts
there is a 46" deck and 50 " deck both powerflows are very different .. also mounting brackets and cover plates are different . the 50 inch mounting pin goes on the outside back of deck .. and has a bigger sqare look at deck ...46 " mounting pin goes inside deck . and has a lower plastic section that goes under deck. the 46 has 2 bolts from power flow berring mount ...50" has 4 bolts for berring mount ... both take the square shoot ...they also make a 48 powerflow .
 

·
Registered
Joined
·
379 Posts
46 & 50 powerflow heads are different.
You will need the 50 powerflow head to attach to your 50 deck.
46 powerflow head pin attaches to bracket inside the deck mouth opening.
50 powerflow head pin attaches to bracket on outside, rear, of deck mouth opening.

46 Powerflow Parts -
Front bracket - AM102176
Rear Bracket - AM117800
Double pulley - M91361
Pulley nut - M91360
Hitch pin - M94334 (NLA)
There are a few more parts if you want to make it complete, such as the belt guard, guard bracket, ring, deck nut, etc.

50 Powerflow Parts -
Front bracket - AM102176
Rear Bracket - AM101889
Double pulley - M90692 (NLA)
Pulley nut - M91360
Hitch pin - M94334 (NLA)
There are a few more parts if you want to make it complete, such as the belt guard, guard bracket, ring, deck nut, etc.

I have some of these parts left over in my spare parts bin. PM me if you think I might be able to help.

Picture 1 is a 46 deck PF blower head. Picture 2 is a 50 deck PF blower head. There is a big difference.

Plant Fender Grass Gas Bumper



Bag Bumper Automotive exterior Electric blue Strap
 
  • Like
Reactions: TempletonJDguy

·
Registered
Joined
·
27 Posts
Discussion Starter · #5 ·
there is a 46" deck and 50 " deck both powerflows are very different .. also mounting brackets and cover plates are different . the 50 inch mounting pin goes on the outside back of deck .. and has a bigger sqare look at deck ...46 " mounting pin goes inside deck . and has a lower plastic section that goes under deck. the 46 has 2 bolts from power flow berring mount ...50" has 4 bolts for berring mount ... both take the square shoot ...they also make a 48 powerflow .
Thank you so much for this information.
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #6 ·
46 & 50 powerflow heads are different.
You will need the 50 powerflow head to attach to your 50 deck.
46 powerflow head pin attaches to bracket inside the deck mouth opening.
50 powerflow head pin attaches to bracket on outside, rear, of deck mouth opening.

46 Powerflow Parts -
Front bracket - AM102176
Rear Bracket - AM117800
Double pulley - M91361
Pulley nut - M91360
Hitch pin - M94334 (NLA)
There are a few more parts if you want to make it complete, such as the belt guard, guard bracket, ring, deck nut, etc.

50 Powerflow Parts -
Front bracket - AM102176
Rear Bracket - AM101889
Double pulley - M90692 (NLA)
Pulley nut - M91360
Hitch pin - M94334 (NLA)
There are a few more parts if you want to make it complete, such as the belt guard, guard bracket, ring, deck nut, etc.

I have some of these parts left over in my spare parts bin. PM me if you think I might be able to help.

Picture 1 is a 46 deck PF blower head. Picture 2 is a 50 deck PF blower head. There is a big difference.

View attachment 283043


View attachment 283044
Thank you for this information. I now know I have a powerhead for a 50" and a 46". I also appreciate the part numbers
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #7 ·
46 & 50 powerflow heads are different.
You will need the 50 powerflow head to attach to your 50 deck.
46 powerflow head pin attaches to bracket inside the deck mouth opening.
50 powerflow head pin attaches to bracket on outside, rear, of deck mouth opening.

46 Powerflow Parts -
Front bracket - AM102176
Rear Bracket - AM117800
Double pulley - M91361
Pulley nut - M91360
Hitch pin - M94334 (NLA)
There are a few more parts if you want to make it complete, such as the belt guard, guard bracket, ring, deck nut, etc.

50 Powerflow Parts -
Front bracket - AM102176
Rear Bracket - AM101889
Double pulley - M90692 (NLA)
Pulley nut - M91360
Hitch pin - M94334 (NLA)
There are a few more parts if you want to make it complete, such as the belt guard, guard bracket, ring, deck nut, etc.

I have some of these parts left over in my spare parts bin. PM me if you think I might be able to help.

Picture 1 is a 46 deck PF blower head. Picture 2 is a 50 deck PF blower head. There is a big difference.

View attachment 283043


View attachment 283044
I need the rear mounting bracket for the 50" AM101889. let me know if you have one. My email is [email protected].
46 & 50 powerflow heads are different.
You will need the 50 powerflow head to attach to your 50 deck.
46 powerflow head pin attaches to bracket inside the deck mouth opening.
50 powerflow head pin attaches to bracket on outside, rear, of deck mouth opening.

46 Powerflow Parts -
Front bracket - AM102176
Rear Bracket - AM117800
Double pulley - M91361
Pulley nut - M91360
Hitch pin - M94334 (NLA)
There are a few more parts if you want to make it complete, such as the belt guard, guard bracket, ring, deck nut, etc.

50 Powerflow Parts -
Front bracket - AM102176
Rear Bracket - AM101889
Double pulley - M90692 (NLA)
Pulley nut - M91360
Hitch pin - M94334 (NLA)
There are a few more parts if you want to make it complete, such as the belt guard, guard bracket, ring, deck nut, etc.

I have some of these parts left over in my spare parts bin. PM me if you think I might be able to help.

Picture 1 is a 46 deck PF blower head. Picture 2 is a 50 deck PF blower head. There is a big difference.

View attachment 283043


View attachment 283044
46 & 50 powerflow heads are different.
You will need the 50 powerflow head to attach to your 50 deck.
46 powerflow head pin attaches to bracket inside the deck mouth opening.
50 powerflow head pin attaches to bracket on outside, rear, of deck mouth opening.

46 Powerflow Parts -
Front bracket - AM102176
Rear Bracket - AM117800
Double pulley - M91361
Pulley nut - M91360
Hitch pin - M94334 (NLA)
There are a few more parts if you want to make it complete, such as the belt guard, guard bracket, ring, deck nut, etc.

50 Powerflow Parts -
Front bracket - AM102176
Rear Bracket - AM101889
Double pulley - M90692 (NLA)
Pulley nut - M91360
Hitch pin - M94334 (NLA)
There are a few more parts if you want to make it complete, such as the belt guard, guard bracket, ring, deck nut, etc.

I have some of these parts left over in my spare parts bin. PM me if you think I might be able to help.

Picture 1 is a 46 deck PF blower head. Picture 2 is a 50 deck PF blower head. There is a big difference.

View attachment 283043


View attachment 283044
I need the rear bracket AM101889. If you have this let me know. My email is [email protected]
 
1 - 7 of 7 Posts
Top