Need Correct Snowblower Model Information

441 Views 1 Reply 2 Participants Last post by mathman, Jul 4, 2011

Broeser340

Discussion Starter · Jun 16, 2009

I am looking for a snowthrower/blower for my '72 110 Hydraulic. The serial number is 267449 and the type is T0632 if it matters. I have heard of a Model 36 which is supposed to fit 110's from this era? I have also heard of a 36A. Which one is correct? Either of them? If so, is either one better than the other. If not, please let me know which is the correct model number or best one. A while back I found a website with this information but now I cant find it.

Also looking for any advice as to what to look for when getting ready to purchase (i.e. commonly worn/fatigued/broken/missing components, and other things to look for. What would be a fair price range for something that works or just needs some paint? Thank you.

Save

1 - 2 of 2 Posts

mathman

· #2 · Jul 4, 2011

Is there a period of "settling in" on the height adjustment of the mower deck? I bought the X500 new last year and it was fine but the deck seemed to sit lower after the first time I had to remove and re-install it. It cut fine at the height I wanted so I didn't worry about it too much. This year I noticed the front seemed to be a bit lower than the rear so I went through all of the adjustments. It took a full width of the rear adjustment nuts to get the rear of the deck back to the correct height and five full turns of the front adjustment nuts to get the front corrected.

Everything seems to be fine for now, it just seemed to be a lot of adjustment for having less than 24 hours on the clock.

David

Save

1 - 2 of 2 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month