Weekend Freedom Machines banner
1 - 1 of 11 Posts

· Registered
1,313 Posts
Omg. I just reread the sticker on the deck explaining how to set the mower height with the wheels 1/4in off the ground. I have been mowing wrong with my 330 the entire time. Ugh no wonder the wheels dig into the lawn when turning. I was basically dragging the deck around like a mid mounted blade.
Does the 330 have the adjustment at the rear rockshaft? It should be a big threaded rod with a roll pin through the end. That (if it's like the 332/318) should adjust the down position stop.

The height of the blades is measured from flat ground below the tires, like a decent concrete pad or something level. Then adjust your wheels up 1/4".
  • Like
Reactions: jake_vc
1 - 1 of 11 Posts