Weekend Freedom Machines banner

Onan Oil Seal

1188 Views 7 Replies 6 Participants Last post by  rapshee
I have an 87 316 with a P218G. Could someone give me the part numbers for the rear crank seal and bearing plate gasket. Its gots a leak.
1 - 1 of 8 Posts
Erik fix the leak sooner than later Onans don't like Oil leaks stops them from cooling properly then they like to break connecting rods
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.