[michaelm]

I'm trying to get set up to plow a small garden for the first time with my John Deere 420. I've found a lot of pages with links to http://www.wfmachines.com/techinfo/plowsetup.html, but the page is no longer there. Try as I may, I'm not able to find it if it was moved somewhere else. Is it gone forever, or does someone have a new link or a saved copy? Thanks

 

[lt230s]

It might have got lost when new owners took over and changed site format. Hopefully someone may have saved in PDF format and can share.
What type do you have, integral hitch or 3 point?

 

[michaelm]

Three point.

 

[colobob]

Attached is the Brinly manual for their 12 in. plow. Pages 3, 4 & 5 have info about setting up a plow. This is the same basic procedure I use. In addition to what is described in the Brinly manual I will also sight along the landside to make sure it is parallel to the furrow and adjust accordingly. I have some other documents about plow setup I will post when I find them.

Bob

 

[T-Mo]

Some info for your browsing pleasure.

I might setup a post in the Tech FAQ section or maybe elsewhere on plow information stuff.

 

[michaelm]

Some info for your browsing pleasure.

I might setup a post in the Tech FAQ section or maybe elsewhere on plow information stuff.

Thank you both! I will take a look through all this. It looks like it will be very helpful.
It's unfortunate - it seems like a lot of good pictures and info were lost when the site was updated.