Weekend Freedom Machines banner
1 - 10 of 10 Posts

· Registered
Joined
·
15 Posts
Shady, Sorry I just noticed your thread. I completed my 318 repower on January 1. Please let me know if i can help. I can help you with the wiring if you need. I had no trouble with mine. There are a few changes I needed to make. I saw your muffler didn't fit. I adapted the Onan muffler to fit under the hood (pain in the neck). I posted on Dennis' thread on what I plan to do for the PTO clutch.
 

· Registered
Joined
·
1,163 Posts
I saw your muffler didn't fit. I adapted the Onan muffler to fit under the hood (pain in the neck).
I had already acquired a Honda muffler before Denis said they wouldn't fit. And he was right. Since I don't weld what would be the less expensive way to get a quiet muffler under the hood?
1) Cut, re size, and lower the Predator muffler.
2) Adapt the Onan muffler.
3) Cut and adapt the pipes of the SEW Honda Kit Muffler.
4) Something Else.
 

· Registered
Joined
·
15 Posts
You can probably use the manifolds from the Predator engine and adapt them to the onan muffler. I made new manifolds but that may not be necessary. Then you would only need to weld the manifold or maybe even use some kind of flex pipe
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top