Weekend Freedom Machines banner

Prep and painting

516 Views 1 Reply 2 Participants Last post by  woodpecker41
Looking for advice & opinions. Doing a bare frame up restore and going to use HVLP guns. Except for some small rattle can jobs I have never done body work or painted with air guns. I want to do all of it myself and I want it done right so any advice would be welcome. Thanks
1 - 2 of 2 Posts
Mike if you have never painted with a gun I suggest you see if you can take a night school class at a Vocational Technical School in your area. Large books have been written about this and there are reasons for that. That is what I did in the 1970s and there are so many new things in painting I would do the same thing if I was going to start painting again. Roger
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top