Joined
·
46 Posts
What needs to be covered when pressure washing a new to you tractor ? I just picked up a 1968 140 H 3 and it has about a 100 lbs of crud stuck to it. Were do I need to worry about hitting it with the pressure washer. Thanks
Pressure Washer
1 - 7 of 7 Posts
Joined
·
6,510 Posts
All things electrical and engine openings.
Joined
·
264 Posts
in addition to those places, be careful around the transmission pressure relief valves (pop up buttons) and the transmission input and output shafts. U joints on driveshaft. Seal area on hydraulic cylinder. Axle shaft seals. Hydraulic valve seals. Etc Etc.
Joined
·
46 Posts
So I should try to keep it quick and tape off as much as I can.
Joined
·
3,619 Posts
I'd remove all the body tin and cover electricals and seal any openings, then wash the crap out of it.....or off of it I mean...
Joined
·
46 Posts
Thats my plan. I have the tin off and then will pull the motor.
Joined
·
38 Posts
Some spray 9 is the best cleaner I have used
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
1 - 7 of 7 Posts
