Weekend Freedom Machines banner

Question for the Vanguard Re Power Folks

432 Views 2 Replies 3 Participants Last post by  dalekast
Yes my 318 uses a little oil and smokes on start up and running. So someday I will need to decide on a re-power with a Vanguard or Re-build the old P series engine.

Are the repowers as critical on the air flow and cooling as the old Onans? Seems the OEM engines had to have the fins perfectly clean or they would fail.
1 - 1 of 3 Posts
...and they move A LOT more air over the cylinders. Make sure all of your screens are in place, and the seal between engine and firewall, is tight.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.