Weekend Freedom Machines banner

Quick 214 Electric PTO Question

1056 Views 11 Replies 8 Participants Last post by  sreynolds
Not sure if this is where to post this or not. I have an RX95 rear engine rider. Engine runs fine but if I engage the deck it kills the engine. If I put in gear it kills the engine. I have a new seat switch. I can jump the tranny switch and it will go but if you engage the deck it kills the engine. Not sure if I am missing something simple or what. I have looked around for a wiring diagram with no luck. I have checked the switchs and all seem to work. There is some sort of little relay switch but its unclear to me what it is supposed to do so I realy don't know how to check it. Any help or advice will be appreciated
1 - 1 of 12 Posts

Welcome to the WFM forum! Your riding mower is discussed in the late model forum -- should be lots of members there with good advice to offer.

Sounds like you have a safety interlock problem with the way the ignition is being inhibited when you try to engage the deck... Here is what little wiring information I have from a similar unit:

Good luck!

See less See more
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.