[Sask140]

Hi all;
in trying to replace the fuel filter on my 2004 2210, I am stuck. The cast ring that threads to hold the glass bowl in place is to be turned counter clockwise, according to the manual. I have gotten MAYBE 1/4 turn, no more. My attempts are actually bending the bracket the filter assembly is mounted to. I have soaked it with wd-40, to no avail.
Any thoughts?

 

[woodpecker41]

Try turning it the other direction. I suspect you are tightening it. Roger

 

[Sask140]

So... counter clockwise from the bottom perspective, not the top!

 

[woodpecker41]

Yes. Roger

 

[mwg321]

I have 3 112's & a 110 that all have play in the rear wheel hubs. Is this normal and if not what to do to repair ?

 

[KB]

a little bit is normal.

 

[JDF/ SwampFox]

It'll only get worse.
Some people drill a couple locking holes in them. Drill and tap, then use bolts to lock it to the axles.

 

[sreynolds]

I hear both; The hub is wobbly on the axle shaft.

The hub is frozen to the axle shaft.

There isn't going to be a happy medium from all the posts I have read about hubs on the axle shafts.