Weekend Freedom Machines banner

Recommendations on fuel line clamps??

7062 Views 11 Replies 9 Participants Last post by  dr_evil
I am replacing the fuel lines on my JD 318, tank grommets and all. Best fuel line clamps? Old style hose clamps or squeeze type? Others? Thanks.
1 - 2 of 12 Posts
I use the 3/16 inch clamps on the reserve line - cut the tabs off after connecting the hose to the fitting and moving the clamp up to secure - seat the bushing in the tank push everything down snug then drive it home with a BIG HAMMER the hose clamp will go through the bushing even without grease.

I've had good luck reusing the clamp type from John Deere for the rest of them.
See less See more
At least think about tygon for the inside the tank reserve line.
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.