Weekend Freedom Machines banner
1 - 14 of 14 Posts

· Administrator
Joined
·
6,442 Posts
Discussion Starter · #8 ·
The multi-bend shape on the one end of mine, could have been developed over time and may have been similar to what Stephen shows. I do know both mind and Stephen's matches the diagram in the 38 deck OM more than Roger's does.

(Message edited by treed on November 05, 2014)
 

· Registered
Joined
·
10,704 Posts
Terry as I said mine is home made. I made a cardboard template to fit the deck and use the existing holes. For what it is worth it does work well. If I remember right the curve on the bottom is there because the piece of metal I used had that little bit cut off of it. Roger
 

· Administrator
Joined
·
6,442 Posts
Discussion Starter · #11 ·
Roger,
I missed the the part about "I made", etc. My bad.

Scott,
If you want, send me the pics and I can post them. BTW, if you want I can edit your post, but I actually don't like editing - too much of a hassle.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top