Weekend Freedom Machines banner

Rigid vs Flex Hyd lines

1223 Views 9 Replies 8 Participants Last post by  charms
So I'm to the point of my 300 power steering project where I need to make the decision of going with flex rubber hoses or investing in tools to make my own hard lines. I would love to have the ability to make my own rigid lines for other projects but curious how much I'll have to spend for tools that will work. I stopped by Napa on the way home tonight and noticed their tools would only cost around $40 for a tube bender and flare tool. I'm not sure if the flare tool would be worth it or not. I estimated it would cost me around $200 for all flex lines but only about $100 for rigid if their tools work. Any one use Napa tools for creating their own lines before? I'd hate to toss money at tools that let a man down.

Any advice would be appreciated


1 - 1 of 10 Posts
I made hard lines for my 300 P/S conversion. Very happy with how it turned out. There is a thread of mine on MTF forum somewhere. Sorry, I don,t know how to post the link. Also a youtube vid.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.