Weekend Freedom Machines banner

SEW 318 Honda Conversion

5692 Views 19 Replies 11 Participants Last post by  gkonyk
So I called SEW today to inquire about a 24HP Honda conversion for a 318. They tell me they no longer sell that kit. So can anyone here tell me what needs to be made and supply some sketches? The mount looks easy. I know there is a plate for the front and a bushing. Then the piece for the drive shaft, and the muffler and heat shield + wiring. Anything else? Anyone know the source of the basic muffler they used?
1 - 3 of 20 Posts
Keep in mind that the Kohler kit has the exhaust coming out the front grill.
That killed it for me.
I bought a rebuild Onan long block from the guy who advertises on eBay:
don't like the Kohler kit with the exhaust to the front;
others thought Briggs & Stratton was a typical small engine manufacturer;
Honda kit was no longer available.
Sorting through electrical problems, as soon as I am done with that I will report back on my findings.

Just the engine sitting in the tractor running is so sweet.......
1 - 3 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.