Weekend Freedom Machines banner
1 - 4 of 4 Posts

· Registered
Joined
·
2,276 Posts
Idk the answer to that question but I’ll add that a lot of the bolt holes on these Onan engines go directly through to inside of the engine and thread sealant should be used on the screws/bolts to prevent oil seepage.
 

· Registered
Joined
·
274 Posts
There are 4 bolts which attach the coil to the engine. The coil plate has 3 studs on it with spring and elastic stop nuts to adjust the clutch gap. From PC1924

White Font Parallel Rectangle Pattern
 

· Super Moderator
Joined
·
4,611 Posts
Just curious here ... why are there generally only 3 screws/bolts in the Onan stator coils when there's 4 holes? Thx, Bryan
If you are speaking of the stator under the flywheel it's because of other items mounted there namely a pickup.
 
1 - 4 of 4 Posts
Top