[LukeDM]

Howdy everyone. I'm trying to replace the hydraulic hose that goes from the hydrostat to the steering valve on a 92 332. I'll eventually remove enough parts I can get to the bottom of the valve to take the hose off, but I thought I'd see if there was some collective wisdom I'm missing out on here.

Thanks in advance!

 

[LukeDM]

I got it figured out. The radiator had to come out, in case anybody needs this info later.

 

[Timothy]

Glad you got it figured out. That’s a hard hard job. On a 4X5 the hoses all come off together which is not easy. I’m not sure if a 300 series if the same.