[mwoodland]

I have to replace the tensioner bracket for the front PTO belts. There is a small round spring and I can't figure out how to install it on the bracket.
Any information, pictures or diagrams would be appreciated.

Thanks,

 

[wader1914]

Mike ... just did mine a couple weeks ago. Sorry this pic isn't any clearer. I initially made the mistake of trying to line the bolt hole on the brake arm inside/in between the arms with bolt hole on the pulley arm ... it lays in front of the pulley arm. From back to front is pulley arm, torsion spring, pulley arm, brake arm, bolt. Hope that makes sense and helps with the pic. Bryan.

 

[sreynolds]

Yeah...........

Been there.

Done that.

I can't help you....been too long.

 

[jameszmcnelley]

Mike, does this help?

had this left in my files, from when I welded up the worn holes and re-drilled for tight fit.
the spring should be shown in its proper orientation. later, JZM

 

[mwoodland]

Guys, thanks a bunch. Just what I was looking for

 

[Ricolifts]

Mike, does this help?

had this left in my files, from when I welded up the worn holes and re-drilled for tight fit.
the spring should be shown in its proper orientation. later, JZM

These pics aren’t showing up anymore and I have a. Similar problem any help would be appreciated

 

[wader1914]

Rico ... these may have been pics I posted way back when ... sorry, not real clear ... hope they help ... Bryan