[pw1986]

Just wanted to say thanks for the help here. I got all of the answers I needed from these forums here when I finally got around to getting my hydraulic spout rotation done.

 

[sublime68charger]

that looks nice!

 

[dhager4692]

I'm sure you will enjoy this.

 

[sublime68charger]

What type of Hydro motor did you put on for the chute rotation and where did you get if from if you want to share thanks

 

[pw1986]

I got it from surplus center. With this particular motor it was small enough that I could utilize the factory bracket without making a new one. Of course you'll have to get a flow control valve also.

 

[Mike48321]

Did you try it without the flow restrictor?

 

[Mike48321]

I've been wanting to do this to mine. How did you make it work with the factory bracket?

 

[army]

I use mine all the time. Often on the fly and sometimes when it isn't actually necessary just to watch the rooster tail swing around.

Just wanted to say thanks for the help here. I got all of the answers I needed from these forums here when I finally got around to getting my hydraulic spout rotation done.

 

[pw1986]

Definitely will not work without a flow restrictor. I was able to cut off the original tube that the rod went through. Then used a die grinder to get the center hole just the right size and with the small bolt pattern on that motor all 3 bolt holes fit on the original bracket.