Weekend Freedom Machines banner
1 - 6 of 6 Posts

·
Banned
Joined
·
15 Posts
Discussion Starter · #1 ·
First I want to say great site. I have got some great help here.
Now my ? where can I get a throttle linkage and all the springs for my 212. I just picked it up and it is missing a lot of things . most I have found but having a tuff time tracking down these
 

·
Banned
Joined
·
15 Posts
Discussion Starter · #2 ·
Any good suggestions where I can get the parts for the throttle linkage and springs for a 212. I just picked it up and it is missing all the throttle controlls.I have found most of the parts except the springs and throttle control arm.
 

·
Banned
Joined
·
15 Posts
Discussion Starter · #3 ·
Any good suggestions where I can get the parts for the throttle linkage and springs for a 212. I just picked it up and it is missing all the throttle controlls.I have found most of the parts except the springs and throttle control arm.
 

·
Banned
Joined
·
15 Posts
Discussion Starter · #4 ·
Any good suggestions where I can get the parts for the throttle linkage and springs for a 212. I just picked it up and it is missing all the throttle controlls.I have found most of the parts except the springs and throttle control arm.
 

·
Banned
Joined
·
5 Posts
Is it possible to convert a briggs 650 from a light to heavy flywheel? I came a cross a 650 to swap out my old Tecumseh on my 65. The only problem is that it will run lousy with a light flywheel. Come on, help me out Terry!
 

·
Registered
Joined
·
10,675 Posts
It is possible but the expense would allow you to just buy a heavy flywheel engine to start with. Roger Edit: I did a quick look and a flywheel for a Briggs is going to run $75 to $150 depending on the specifications on the engine. Roger
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top