Weekend Freedom Machines banner
1 - 5 of 5 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter · #1 ·
Working on my '66 110

How do you get the variable speed lever "hub" removed from the speed control shaft?

hub part # M 11003 M
shaft part # AM 30023 M

I'm in the process of breaking down the pedestal assembly and got hung up here.
 

·
Registered
Joined
·
81 Posts
Discussion Starter · #3 ·
Thanks.... On the very bottom of the hub is a small hole where originally I thought there might be a set screw, but of course there isn’t. I fished a small wire thru that hole and it comes clear thru the shaft and out the top. See Photo....

I’m thinking the pin is already missing and I can put a puller on the hub and remove it. I’m just trying not to tear anything up.

Agree?

 

·
Registered
Joined
·
81 Posts
Discussion Starter · #5 ·
It's amazing how easy something can be when you know what you are doing.

Mission accomplished.... and thanks Mr Lincoln!

Neither of my manuals showed accurately what was going on with that pin.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top