Joined
·
45 Posts
I need the 4 rubber pan bushings for my JD 140 and I also need the nylon bushings for the H3 control arms. Any one know were I can get them? Thanks.
I had them laying around. I didn't even know they had rubber bushings there. Until I saw that guy's post. Mine didn't have them.Mike, that‘s a great idea for those front mounts!
Thinking outside the box!
5/16"-18 1" H X 1 1/2" D. McMaster-Carr |
That does look like it would be easier to deal withMcMaster-Carr and Grainger's has all that stuff.
This is what I installed under the front of my 140 seat pan. This type of mount makes it a lot easier to install the pan because you don't have fumble with the bolt and nut that is almost impossible to reach that is under the frame. McMaster also sells the mount with threaded studs on the top and bottom for use on the rear anchor mounts.
pan. View attachment 288173 Isolation Mounts.
5/16"-18 1" H X 1 1/2" D. McMaster-Carr
I HAD TO TAKE UP MY 318 PAN AND REMEMBER SEEING 4 RUBBER PATS WHERE THE PAN RESTED ON![]()
212 are my rubber fender mounts missing?
1977 212 serial number is in the 70,000 range. I just picked it up and am going through it. I noticed that there are no rubber isolators between the fender pan and the rear mounts. On my 330 there are 4 rubber isolators that the fender pan sits on. I opened up the parts diagram and there are two...www.wfmachines.com