Weekend Freedom Machines banner

1 - 8 of 8 Posts

·
Registered
Joined
·
339 Posts
Discussion Starter #1
What size is the stator on a K241 from a 77 210? Is it a 10 or 15 amp stator? Any way to tell?

Also, any kind of brake conversion I can do? The drum is broken off the trans and I would prefer disc brakes.
 

·
Administrator
Joined
·
6,069 Posts
Per the service manual, it's a 15 amp system.
 

·
Registered
Joined
·
339 Posts
Discussion Starter #3
Per the service manual, it's a 15 amp system.
Okay, just wanted to know. If it was a 10 amp, I was just gonna swap it to a 15.
 

·
Registered
Joined
·
339 Posts
Discussion Starter #4
So, what size is the hole for the amp meter? I want to add a new gauge and I have no idea what the hole size is.
 

·
Registered
Joined
·
1,970 Posts
Gages are "normally" 2" Get your gage FIRST, measure, and then cut your hole. Bob
 

·
Registered
Joined
·
339 Posts
Discussion Starter #6
Gages are "normally" 2" Get your gage FIRST, measure, and then cut your hole. Bob
The hole is already there. It's the hour meter hole. It's 2"?
 

·
Registered
Joined
·
1,970 Posts
I believe so, but you can verify with a tape measure. Bob
 

·
Registered
Joined
·
339 Posts
Discussion Starter #8
I'll have to do that when I get home.
 
1 - 8 of 8 Posts
Top