Weekend Freedom Machines banner

1 - 5 of 5 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
I’m looking for the PTO shaft for the 47 or 46 Quick hitch snowblower to fit a 300 series. This is the PTO shaft that hooks onto the snowblower and goes to the adapter on the tractor. I would be interested in the ups stop and PTO hanger as well. Thank you. Can text 605-222-6745
262675
 

·
Registered
Joined
·
4,542 Posts
The quick hitch model 47 snow blower should have these components attached so I need to question.
  1. are you setting up tractor/snow blower and some one sold you model 47 without these components
  2. is the model 47 you want these components for the correct model 47 for 318/322/332?
I have 5-6 driveshaft I am unsure what they fit. I would need description of driveshaft to determine if one of mine fit. I do have quick hitch with pto drive so can determine is tractor end is correct.

Heading to garage shortly ... will have a look at what I have ... Gabby
 

·
Registered
Joined
·
4,542 Posts
Correct drive shaft for M01471X model 47 snow blower (318/322/332/420/430 quick hitch model) is p/n AM123630 which is subbed for AM119807.

I have one but is in storage across the street.

Photo shows 4 driveshafts that fit PTO drive kit. Middle two may be what you need but I need a compressed/extended length to make sure they fit correctly.

DSCN1423.JPG

Lower shaft I wrote 425 sweeper on it. It was probably on model 51 broom I bought and needed to change to make it fit a 318.
 

·
Registered
Joined
·
15 Posts
Discussion Starter #4
Correct drive shaft for M01471X model 47 snow blower (318/322/332/420/430 quick hitch model) is p/n AM123630 which is subbed for AM119807.

I have one but is in storage across the street.

Photo shows 4 driveshafts that fit PTO drive kit. Middle two may be what you need but I need a compressed/extended length to make sure they fit correctly.

View attachment 262685

Lower shaft I wrote 425 sweeper on it. It was probably on model 51 broom I bought and needed to change to make it fit a 318.
Can you pm me a price shipped to 57501
 

·
Registered
Joined
·
4,542 Posts
Correct drive shaft for M01471X model 47 snow blower (318/322/332/420/430 quick hitch model) is p/n AM123630 which is subbed for AM119807.

I have one but is in storage across the street.

Photo shows 4 driveshafts that fit PTO drive kit. Middle two may be what you need but I need a compressed/extended length to make sure they fit correctly.

View attachment 262685

Lower shaft I wrote 425 sweeper on it. It was probably on model 51 broom I bought and needed to change to make it fit a 318.
I have model 47 snow blower and model 51 broom with correct driveshafts attached for use with 3XX quick hitch. Measured retracted/extended lengths of both to confirm with parts I had on shelf.
  • AM123630 (sub for AM119807) ... Model 47 snow blower
    • approx lengths ... retracted 18" ... extended 25"
    • two shafts in middle of photo measure as for model 47
    • Found 4 businesses ... average asking price $447 USD
    • Will sell one for $225 ... NO SHIPPING
    • PM for pick up location ... I do make business trips ... upcoming trip to Minneapolis area. Can delivery between home and Minne.
    • DSCN1431.JPG DSCN1430.JPG
  • BM18173 (sub for AM119884) ... Model 51 broom
    • approx measured lengths ... retracted 22 3/4" ... extended 29 1/2"
    • driveshaft is 15 spline shaft
    • I do not have a spare driveshaft for this drive shaft
    • DSCN1433.JPG DSCN1429.JPG
  • The lower drive shaft original photo says it is for a 425 broom. I assume it was on my model 51 broom when I bought it.
    • It measures 18 1/2" retracted and 26 1/2" extended which is very close to lengths needed for model 47 snow blower but a square shaft that fits inside a square tube.
    • Coupler on hitch is 15 pin
    • and broom end is 1" bore with shear pin and no key.
    • Has Deere safey shield that needs repair.
    • 4X5 quick hitch does not have pto drive kit and driveshaft is much longer as it connects to rear of transmission on rear of tractor. I assume this was a 4X5 mower deck driveshaft that fit to be used on 318 as broom driveshaft. Closer fit is model 47 snow blower.
    • $225 ... NO SHIPPING
 
1 - 5 of 5 Posts
Top