Weekend Freedom Machines banner
1 - 1 of 1 Posts

· Registered
104 Posts
Discussion Starter · #1 ·
Is there a period of "settling in" on the height adjustment of the mower deck? I bought the X500 new last year and it was fine but the deck seemed to sit lower after the first time I had to remove and re-install it. It cut fine at the height I wanted so I didn't worry about it too much. This year I noticed the front seemed to be a bit lower than the rear so I went through all of the adjustments. It took a full width of the rear adjustment nuts to get the rear of the deck back to the correct height and five full turns of the front adjustment nuts to get the front corrected.

Everything seems to be fine for now, it just seemed to be a lot of adjustment for having less than 24 hours on the clock.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.