[jake_vc]

Drive over decks are mainly designed for just the front wheels to go over., especially if its a quick connect. With having a 2wd X740 you're going to have some issues backing off your deck, especially if your doing it on a hard surface. The 4wd and AWD version the front wheels will climb up the deck, the 2wd the front wheels tend to "push" the deck. I would make some small wooden ramps to go between the front wheels and deck when you go to take it off.

 

[jake_vc]

After looking closer it appears my rear wheels are set to the wide position . I was surprised that the valve stem is facing out . On previous 300/400 series the valve stem was facing in . With two or three sets of wheel weights how do you get to the valve stem/cap ????? Have to install longer valve stems ?

They make extensions