I’m also working on a non-cable rear lift system. When that is ironed out, I’ll be sure to update.

 

I would been interested in a sleeve hitch.
thanks

 

Truck, I replied to your pm.

 

Tariffs are sending the price of materials up.
Updated prices:
Sleeve hitch: $150, add $30 for “correct” style knob, add $15 for paint
Weight bracket: 4 weight $125, 6 weight $150
H bracket: $45
Gard-N-Cart: $300

 

Bumping this up.

 

Now offering reproduction tiller drive pulleys.

$35 plus shipping.

 

Update: Model 30 tiller drive pulleys are now $55. Last one I made was free labor as materials run me $35.

 

It's hard to make parts for these at an affordable price and not feel like you are charging too much. Everyting has gone up in price. Looks like some good stuff and pricing for hard to find parts.

 

Member asked about the differences between cheaper knob and “correct” knob.
Cheaper knob on bent hitch.

“Correct” knob.

 

Hey Mini,

Any thoughts or plans to make Reproduction coulters for the Brinly plows??

Mitch

 

If someone could lend me one or get me dimensions, I can see what I can do.

 

Nate,
Where are you in PA? I might just have to get you a good coulter to examine and see what you think.
Mitch

 

Just east of Harrisburg. Either that or I just need to break down and buy a plow:lol:

 

I've got a sleeve hitch plow that i would be pleased to sell you that needs a coulter. I'm only about an hour and 15 from H'burg. Lets see what we can do to get together. Are you going to go to the Lebanon sow next month?

 

If anyone is interested, I can make reproduction and custom attachments for Round Fender 110 and 112s.
Rear weight brackets: $45 per pair.
View attachment 236558

Suitcase weight holder/Bumper: 4 weight bracket $100, 6 weight bracket $125 (6 weight doesn’t fit on rear mounts between fenders)
Fits 4 weights, and also fits over draft plate.
View attachment 236560 View attachment 236562

Tiller / Sleeve Hitch “H” bracket: $35
View attachment 236564

Integral / Sleeve Hitch: $120 w/ my style knob. $150 with “correct” style knob. Add $15 for paint.
View attachment 236566 View attachment 236568

Reproduction Brinly BB-342 Hillers: $90 per pair.
View attachment 236570 View attachment 236572

Replica Brinly Gard-N-Cart: $250
My replica is narrower to more closely follow the width of the tractor.
View attachment 236574 View attachment 236576

Of course shipping is not included.

If anyone is interested, I can make reproduction and custom attachments for Round Fender 110 and 112s.
Rear weight brackets: $45 per pair.
View attachment 236558

Suitcase weight holder/Bumper: 4 weight bracket $100, 6 weight bracket $125 (6 weight doesn’t fit on rear mounts between fenders)
Fits 4 weights, and also fits over draft plate.
View attachment 236560 View attachment 236562

Tiller / Sleeve Hitch “H” bracket: $35
View attachment 236564

Integral / Sleeve Hitch: $120 w/ my style knob. $150 with “correct” style knob. Add $15 for paint.
View attachment 236566 View attachment 236568

Reproduction Brinly BB-342 Hillers: $90 per pair.
View attachment 236570 View attachment 236572

Replica Brinly Gard-N-Cart: $250
My replica is narrower to more closely follow the width of the tractor.
View attachment 236574 View attachment 236576

Of course shipping is not included.

I'm interested in a Integral / Sleeve Hitch with correct knob

 

Let me check on steel prices, it’s been a bit since I’ve purchased any. Also are you in a hurry? I’ve received a promotion at work about a year ago and time has been a bit less plentiful. If you aren’t in a rush, I can still make one up for you.

 

Not in rush I got a 67 110 round fender if you needed that info

 

I'd be interested in an integral hitch also.

 

Message sent

 

I didn’t get to my steel guy, and am away on vacation next week. Will update as soon as I check prices.

 

Do you use cold rolled steel?

 

For the flat stock and angle iron parts, no just mild steel. For the round stock items like the Brinly disc hiller standards I do use cold rolled.

 

It is high up on my list of things to do tomorrow as long as work doesn’t go to the dogs.

 

Guys, at this point, I have way to much going on the be able to build this stuff. Heck, I have 2 cases of paint and all the decals to repaint my 60 sitting in the shop for the past few months…. and to top it off, we are just entering our busy season at work. I’ll let you all know when I get the time to see if anyone is still interested. My apologies to everyone.

 

I would also be interested in a integral hitch if the price is still reasonable

 

I’m on the quest to find a mount for the model 30 tiller I got for one of my round fenders. I would be really appreciative if you could sell me a sleeve hitch or sleeve hitch/tiller mount. I’m also trying to find the rear lift linkages that go with. I have had this tiller for over a year now and I would really like to get it functional.

 

So I was busy back in the fall, and unfortunately, I’ve gotten even busier. Along with work never really slowing down, home life has gotten even worse. I also currently don’t have a functioning shop at the moment.
Sorry I can’t help you at the moment.

 

If anyone is interested, I can make reproduction and custom attachments for Round Fender 110 and 112s.
Rear weight brackets: $45 per pair.
View attachment 236558

Suitcase weight holder/Bumper: 4 weight bracket $100, 6 weight bracket $125 (6 weight doesn’t fit on rear mounts between fenders)
Fits 4 weights, and also fits over draft plate.
View attachment 236560 View attachment 236562

Tiller / Sleeve Hitch “H” bracket: $35
View attachment 236564

Integral / Sleeve Hitch: $120 w/ my style knob. $150 with “correct” style knob. Add $15 for paint.
View attachment 236566 View attachment 236568

Reproduction Brinly BB-342 Hillers: $90 per pair.
View attachment 236570 View attachment 236572

Replica Brinly Gard-N-Cart: $250
My replica is narrower to more closely follow the width of the tractor.
View attachment 236574 View attachment 236576

Of course shipping is not included.

Hi homesteader, I'm looking for a 110 round Fender Integral Hitch. how much shipped to Hampstead, MD 21074. If your close enough I can pick it up.

 

My apologies, I moved a few months back, and don’t have power to the new shop yet.

 

Hi homesteader, I am interested in an integral round fender hitch also. I only need the hitch. Our machine has the lift cable etc. Thank you.

 

Sorry, not making any at the moment.