[Brad_ruch]

I can get them for you eric tonight.brad

 

[Brad_ruch]

eric the connecting rod cap screws are 9in ibs.and head bolts are 12in pounds.after putting it back together leave the side shields off the motor and run it for a while to get hot then re-check the torque on the head bolts.

 

[Brad_ruch]

opps you guys are right i read my book wrong.brad

 

[Brad_ruch]

if you don't have a inch pound torque wrench.the heads will be 15ft.lbs.12in pounds for every 1 ft pound.brad